When space matters, a weld-on swing-away trailer tongue can dramatically reduce storage length and improve maneuverability. This guide highlights five top weld-on swing tongue products, explaining who each is best for and why it was selected. Use the quick comparison below to identify the right option for your trailer type and garage setup.
| Product | Best For | Key Benefit |
|---|---|---|
| Tie Down SwingKing Swing Tongue Conversion Kit (3×3) | Small to mid-sized trailers | Compact swing action to save space |
| Tie Down SwingKing Bolt-On Swing Tongue Kit (3×5) | Diverse trailer frames | Versatile sizing and robust hinge |
| BIG RED 2000 Lbs Weld-On Pipe Mount Swivel Trailer Jack | Moderate-weight trailers, frequent height changes | Wide height range, corrosion-resistant finish |
| CURT Weld-On Pipe-Mount Swivel Trailer Jack (3,000/2,000 lbs) | Balanced lifting and towing clearance | Clearance-friendly swivel design with secure lock |
| Folding Trailer Tongue Kit (3×3) by PMTHMPTS | Storage-constrained spaces, steel frames | Folds away to save space |
Tie Down SwingKing Swing Tongue Conversion Kit (3×3)
The SwingKing 3×3 weld-on swing tongue kit provides a pivoting tongue function to reduce trailer storage length. This option is best for smaller trailers with square 3×3 tongues and tight parking spots. The hinge design enables the tongue to pivot to the side, creating additional clearance for garages and driveways.
Who it’s best for: owners of compact trailers who need a simple, space-saving conversion. Why selected: compact footprint, straightforward pivot action, and galvanized finish for corrosion resistance. Caution: verify your tongue size—not all 3×3 frames may accommodate the exact hinge geometry.
SwingKing Bolt-On Swing Tongue Kit (3×5)
The Bolt-On Swing Tongue Kit is designed for 3×5 trailer tubes and offers a pivoting tongue function along with multiple tongue sizes to fit various trailer designs. It provides a space-saving hinge that pivots the tongue aside for easier maneuvering and storage.
Who it’s best for: trailers with longer or non-standard tongues needing a robust, bolt-on solution. Why selected: versatile sizing and strong galvanized finish. Caution: installation requires compatible bolt locations and structural access on the trailer frame.
BIG RED 2000 Lbs Weld on Pipe Mount Swivel Trailer Jack
This weld-on pipe-mount trailer jack offers a swing-back tube mount and a 2,000 lb capacity, with adjustable height from roughly 10.5″ to 20.5″. Its zinc-painted finish provides corrosion resistance. It’s best for users needing a jack that can handle mid-range trailers with frequent vertical adjustments.
Who it’s best for: users prioritizing easy height changes and corrosion protection. Why selected: higher lift range compared to entry-level jacks and a swivel design for towing clearance. Caution: ensure the tongue thickness and mounting area accommodate the 3″–4″ range of fit.
CURT Weld-On Pipe-Mount Swivel Trailer Jack (3,000/2,000 lbs)
CURT’s 3,000 lbs support and 2,000 lbs lift capacity jack uses a swivel bracket for ample towing clearance. It operates with a side-wind handle, offering straightforward raising and lowering over a 10″ vertical travel. This is a solid option for those needing a balance of strength and maneuverability.
Who it’s best for: trailers requiring dependable lift with easy stowage when towing. Why selected: swivel action enhances clearance; robust load rating fits a wide range of trailers. Caution: taller extended height may require extra space for use in tight areas.
PMTHMPTS Folding Trailer Tongue Kit (3×3)
The Folding Trailer Tongue Kit is designed for 3×3 outer square tongues and allows the tongue to fold away, saving storage space. It is clearly marked for steel frames and warns against aluminum frames. This kit fits heavy-duty trailers and RVs needing compact storage options.
Who it’s best for: owners of steel-frame trailers who need the ability to fold the tongue for tighter garages. Why selected: explicit folding capability for space savings. Caution: not suitable for aluminum frame trailers, so verify material before purchase.
Buying Guide: Key Considerations for Weld-On Swing Tongues
- Trailer tongue size and compatibility: Confirm the tube dimensions (e.g., 3×3, 3×5) and mounting style to ensure a proper fit.
- Weight capacity and lift range: Match the jack or hinge system to your trailer’s gross weight rating and intended use.
- Storage space and environment: For tight garages, prioritize folding or swing-away designs with corrosion-resistant finishes for outdoor use.
- Installation requirements: Some kits require welding or specific mounting points; check your trailer’s frame material (steel vs aluminum) and hardware compatibility.
- Clearance during towing: Look for swivel brackets or side-wind operations that maximize clearance while on the road.
Frequently Asked Questions
- What is a weld-on swing tongue useful for? It reduces overall trailer length by pivoting the tongue to the side, easing storage in tight spaces.
- Will these kits fit all trailer frames? Fit depends on tongue size, frame material, and mounting hardware. Always verify tube dimensions and mounting points before purchase.
- Are folding tongue kits safe for high-load trailers? Choose products with appropriate load ratings for your trailer and follow installation instructions to ensure safe operation.
- Do these jacks require ongoing maintenance? Regularly check for corrosion, lubricate pivot points as recommended, and inspect mounting hardware for wear.
- Is aluminum frame support compatible with weld-on kits? Some products specify steel-only mounting. Avoid aluminum frames unless explicitly supported.
- Can I install these myself? Many kits are designed for DIY installation, but some may require welding or professional mounting. Follow manufacturer instructions closely.